MacDon D50 - HC10 Hay Conditioner; Hydraulic Deck Shift Package; Upper Cross Auger

169441 253 Revision D
5.4.6 HC10 Hay Conditioner
When paired with a windrower and a draper header, the HC10 hay conditioner lays uniform, fluffy windrows. Conditioning
or crimping the cut hay allows the release of moisture resulting in faster drying times and earlier processing.
1004322
Figure 5.14: Hay Conditioner
A parts list and installation and operating instructions are
included with the kit.
MD #C1982
NOTE:
Not for use on D50 Draper Headers or M205 SP Windrowers.
5.4.7 Hydraulic Deck Shift Package
This system allows shifting of the decks from the operator’s console when double-windrowing.
Installation and adjustment instructions are included with the kit.
Available on 7.6–12.2 m (25–40 ft.) D60 Draper Headers.
MD #B5201
5.4.8 Upper Cross Auger
The upper cross auger (UCA) attaches in front of the backtube and improves crop feeding into the center of the header in
heavy crop conditions. It is ideal for high-volume harvesting of forages, oats, canola, mustard, and other tall, bushy, hard-
to-feed crops.
1001211
A
Figure 5.15: Upper Cross Auger with Beater Bars
Installation instructions are included with the kit.
Order from the following bundles according to your header size:
• 4.6 m (15 ft.) – MD #B6280
• 6.1 m (20 ft.) – MD #B6281
• 7.6 m (25 ft.) – MD #B6461
• 9.1 m (30 ft.) – MD #B9011
• 10.7 m (35 ft.) – MD #B9010
• 12.2 m (40 ft.) – MD #B9009
OPTIONS AND ATTACHMENTS