169441 33 Revision D
3.7 Shutting down Header
To prevent injuries and equipment damage, always perform the procedures for shutting down the header.
DANGER
To prevent bodily injury or death from the unexpected start-up of the machine, always stop the engine and remove the
key from the ignition before leaving the operator’s seat for any reason.
To shut down the header, and before leaving the windrower seat for any reason, follow these steps:
1. Disengage the header drive.
2. Park the windrower on level ground whenever possible.
3. Lower the header fully.
4. Place all controls in NEUTRAL or PARK.
5. Lower and fully retract the reel.
6. Shut down the engine, and remove the key from the ignition.
7. Wait for all windrower and header movement to stop before exiting the vehicle.
OPERATION
To Next Page
Loading...
