215620 64 Revision A
Figure 3.44: Left Platform Bracket
6. Reinstall platform adjuster bolt (A) through gusset (B) on
the left frame member.
Figure 3.45: Linkage Below Platform
7. Use the existing hardware to connect platform linkage (A)
to hole in the platform. Ensure bushing (B) remains in the
linkage hole; nut (C) is installed below the platform. Torque
nut to 14.5 Nm (11 lbf·ft).
Figure 3.46: Platform Door Stop
8. Use the existing hardware to mount door stop (A) onto the
left platform. Insert bolt (B) from the top and torque nut (C)
to 28.5 Nm (21 lbf·ft).
ASSEMBLING WINDROWER
To Next Page
Loading...
