MacDon M205 2010 - Page 113

HEADER OPERATION – A SERIES
Form 169469/169470/169471 111 Revision C
Adjust the reel speed “on the go” as follows:
6.6.4.2 A30-S and A30-D Headers
The reel is driven by the auger, and both are
dependent on the main header drive speed.
The auger speed and hence the reel speed can
be changed by installing a different size auger
drive sprocket, or by varying the windrower
engine rpm.
Display the reel speed as follows:
HEADER INDEX
SWITCH - OFF
DONE
ON GSL PRESS SLOW OR
FAST
DISPLAY SHOWS
##.## REEL RPM
NO
YES
SPEED
OK?
##.## = 15.00 – 85.00
ENGAGE HEADER
HEADER INDEX
SWITCH - OFF
ON GSL PRESS SELECTOR BUTTON
OR SELECT SWITCH ON CDM FOR
##.## REEL RPM
##.## = 15.00 – 85.00
DISPLAY
SELECTOR
DISPLAY
HEADER INDEX
FAST
SLOW
AUGER
FAST/SLOW