MAINTENANCE/SERVICE
Form 169469/169470/169471 126 Revision C
CAUTION
Do not stand on the platform in the unlocked
position. It is unstable and may result in a
fall.
e. Close platform as follows:
1. Swing link (C) all the way forward.
2. Move platform front (cab-forward) end
inboard while moving it away from the
walking beam.
3. Position link (C) on bracket and install bolt
and nut. Tighten just enough so that link
can still swivel on bracket.
4. Move platform to closed position, ensuring it
is locked.
f. Close engine compartment hood.
To Next Page
Loading...
