Part 2 - Supervisor’s guide
The Supervisor’s guide concentrates on administration and the more advanced
Spraytec features. Topics covered are:
.
Security – explains how to set up administrators, users and user groups.
.
Advanced features – describes triggers, alarms, spray profiles, etc. in detail.
.
SOP management – describes how to edit and delete SOPs and also how to
set up SOP templates.
The supervisor should also read Part 1 - Operator’s guide.
Part 3- Appendices
Appendix A contains essential Health and Safety information which all users must
read. Appendices B and C give the specification and site requirements. The other
appendices contain supplementary information not necessary for the general
operation of the system.
Access to the instrument
This manual refers to the various people who will have access to the instrument,
as follows.
Malvern personnel
Malvern personnel (service engineers, representatives, etc.) have full access to the
instrument and are the only people authorised to perform all service procedures
that may require the removal of the covers.
#
Warning!
Supervisor
The supervisor is the person responsible for the management and safety of the
instrument and its operation. The supervisor is responsible for training the
operators. The supervisor can perform all user maintenance routines identified in
Chapter 8.
CHAPTER 1
Spraytec
Page 1.2 MAN 0368
Removal of the covers by unauthorised personnel will invalidate the
warranty of the instrument.
To Next Page
Loading...
