The Spraytec system components are mains powered devices and all power cables
and electrical sockets should be treated accordingly. Do not place cables where
they are likely to become wet.
PAT testing
If PAT testing is required, connect the earth lead to the earth stud underneath the
rear right-hand corner of the instrument.
Laser safety regulations
The Spraytec is a Class 3R laser product. The instrument contains a
Helium-Neon laser with a continuous laser beam of wavelength 632.8nm, power
less than 5mW and collimated beam diameter less than 20mm.
#
Warning!
Laser path
This diagram shows the path of the laser beam:
APPENDIX A
Spraytec
Page A.2 MAN 0368
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
ILL 7482
To Next Page
Loading...
