Malvern Instruments Spraytec - Introduction

Introduction
This chapter describes advanced Spraytec features. It covers:
.
Derived parameters – describes in detail each parameter the user can pro
-
duce.
.
Triggers – these are used with rapid measurements to signal when to start
measurement.
.
Alarms – describes how warning and error generation is controlled.
.
Spray profiles – to improve the analysis, the Spraytec SOP gives the user
the option of defining the shape, size, and position of the spray plume in
relation to the Spraytec bench.
.
Optical models – describes the Fraunhofer approximation and the Mie
Theory, then the information (refractive indexes and density) which the
Mie Theory needs from the user.
CHAPTER 10
Spraytec Page 10.1