Where to get help
Manual and online help
The primary sources of information on the Spraytec system are this manual and
the software’s online help. This manual gives an overview of the system as a
whole, while the online help gives detailed information on the Spraytec software.
Each dialogue in the Spraytec software has a Help button giving information on
its use.
Accessories manual
The Spraytec Accessories User Manual provides details on the use, functions
and maintenance of the following options/accessories:
.
Spraytec NSS – the actuator support system.
.
Air Purge – used to keep the instrument windows clear of spray.
.
Extractor – used to draw spray through the measurement zone.
As further accessories become available, the manual will be expanded to cover
these.
Help desk
All queries regarding the system should initially be directed to the local Malvern
representative. Please quote the following information:
.
The model and serial number of the instrument (located on the back of the
Receiver module). This is also available from the software when an instru
-
ment is connected.
.
The Spraytec software version (to find this, select Help-About in the soft
-
ware).
Contact the United Kingdom help desk if the local Malvern representative is not
available. Its direct line is +44 (0) 1684 891800.
'
Note
.
This help line is primarily English speaking.
CHAPTER 1
Spraytec
Page 1.4 MAN 0368
To Next Page
Loading...
