Operator
An operator is a person trained in the use of the system. The operator can
perform all user maintenance routines identified in Chapter 8.
#
Warning!
Assumed information
Naming convention
The Spraytec is referred to either in full as ‘the Spraytec’ or as ‘the instrument’.
The combination of the Spraytec instrument, the computer and the Spraytec
software is referred to as ‘the system’.
Menu commands
Menu commands in the Spraytec software are always shown in bold text and
shown in the form:
main menu-menu item-submenu item.
As an example, the command Tools-Options-Serial Port refers to selecting the
Serial Port option of the Options command in the Tools menu.
CHAPTER 1
Spraytec Page 1.3
Under no circumstances should a supervisor or operator remove the
main cover of the instrument. Failure to follow these guidelines could
result in exposure to hazardous voltages.
To Next Page
Loading...
