Drive lever control unit
45
Read this manual carefully before starting any work!
This is particularly applicable to the chapter “General Safety Instructions”
and the respective safety instructions in the chapters.
In the following table, the deliverable connecting cables are shown for:
- Drive lever ↔ Drive lever
- E-box ↔ Drive lever
- Cross-communication E-box ↔ E-box (only possible for E-box -non classified-)
L40
PIN
Bush
Length L Part number
2 m 51.25449-0056
5 m 51.25449-0057
10 m 51.25449-0052
15 m 51.25449-0053
20 m 51.25449-0054
tested/classified up to 29 m
30 m 51.25449-0055
Adapter cable:
- MPC internal ↔ Drive lever cable external
Length L Part number
0,5 m 51.25411-6133
0,5 m 51.25411-6134
To Next Page
Loading...