GROVE 8-7
CD3340B/YB4411 AXLES/DRIVE SHAFTS/WHEELS AND TIRES
Published 04/07/2015 Control # 569-00
Checking with Axle Removed from Machine
1. Align the wheel hubs in straight forward position.
2. Measure the distance between the hubs on both sides of
the axle (Figure 8-15).
3. Both dimensions must be the same.
4. If incorrect, use steps 3 through 8 under Checking with
Axle on Machine, page 8-6 to adjust the measurements.
Reference Only
To Next Page
Loading...
