Manitowoc MLC165-1 - Page 61

Manitowoc Published 08-06-19, Control # 237-09_v1 3-11
MLC165-1 OPERATOR MANUAL OPERATING CONTROLS AND PROCEDURES
3
Right Console
Table 3-4. Front Console
Item Name Description
1
Rated Capacity Limiter / Rated
Capacity Indicator (RCL/RCI)
Display
Displays load lifting information and alerts the operator to overload conditions.
See the MLC165-1 RCL/RCI Manual for instructions.
2 Main Display
Displays operating conditions, faults, and diagnostic information. See the
MLC165-1 Main Display Operation Manual for instructions.
3 RCL/RCI Indicators
Alerts the operator to overload conditions:
• Red light (A) = maximum load
• Amber light (B) = near maximum load
4 Limit Bypass Key Switch
This key can bypass the limits described in
Bypassable Limits Identification on page 3-
24:
• To BYPASS an operating limit, turn the key
to I and hold the key in this position.
• To ENABLE operating limits, release the
key to O. This position allows a limit to stop
a crane function in the normal matter. The
key must be in this position for all
normal operation. Otherwise, structural
damage can occur.
Remove the key to prevent unauthorized operation.
M100240
M100239
M100238A
OR
A
B
M100242