Preliminary Preparations for Printing Preparing Your Printer for Printing
8-10 Sprinter User's Manual
13. From the CONTROL PANEL dialog box, turn the power on and activate the
M
OTOR by clicking the RUN button of the relevant color.
Make sure that the R
IBBON is rolling smoothly over the take-up core
through all its width.
14. When the R
IBBON has become taut, stop the MOTOR by clicking the RUN
button.
15. Repeat this procedure with the other three colors as necessary.
16. Close the H
EAD and RIBBON cover.
To Next Page
Loading...