Matrox Display Wall – User Guide 33
Once all your cards are connected, restart your system and install your Matrox software (see
“Installing your software”, page 53).
HDMI If your monitor has an HDMI connector, use a mini DisplayPort to
HDMI adapter (active
*
) to connect to the mini DisplayPort connector
on your Matrox card. Connect your monitor to the HDMI connector
on your adapter.
Network
(RJ-45)
If your video device streams to an IP network, connect a network
cable to your Matrox card. Your video device must stream using an
RTSP, RTP, SRT, or MPEG-2 TS protocol.
* Only active adapters (sold separately) are supported. Passive adapters aren’t supported.
Device connector Description
To Next Page
Loading...
