Playing Voices
The keyboard has 672 remarkably realistic built-in voices including Piano, Woodwind, Saxophone, Drum Kits and many more, .
Please refer to Voice List.
Turn the R1 PART on
Normally, the default setting is R1, or you can press PART ON/OFF
[R1] to turn the right 1 part on.
Note:
You can also turn most 4 parts on at the same time (L, R1, R2, andR3),
refer to Playing Different Voices with the Left and Right Hands
chapter for details.
Select a Voice for R1 PART
1. Select a voice category, call up voice selection display.
There are 2 methods to select a voice category:
Panel button: press one of the panel voice category buttons located
on the right-top of instrument. For example “PIANO”, as the picture
shown.
Screen button: in main display, tap the R1 part.
2. Select an exactly voice.
Use DATA DIAL or [+] / [-] button move cursor position step by step.
The last voice you have selected will be saved as your new choice.
See Basic Operations page description. Also can use screen page
up or page down button to browsing files by pages.
Play the Voice Demo
Press the “Voice Demo” on the Voice Selection display to start the
demo for the selected voice. Press the “Voice Demo”again to stop it.
Note:
If there isn't voice demo for the selected voice, “Voice Demo” will not
be displayed.
Play the keyboard and listen to the selected voice.
15
To Next Page
Loading...
Need help?
General
