Global Setting
Controllers
This instrument has many useful assignable controllers: 2 knobs, 6
multi pads and 1 pedal. Lots of applied settings can be controlled in
real-time.
Press the “Controllers” button to call up relevant display. These
parameters can be set bellow:
Knob
These knobs let you change various aspects of the sound in real time
while you are playing. Turn a knob towards right to increase the value,
and the left to decrease it. There are 4 groups, 3 are fixed settings, and
1 assignable setting. In Controller display, press the “Knob” tab.
Press the [SELECT] button to switch knob settings from Groups. The
relevant panel LED will light up when you select a group setting. Touch
the screen to select the knob icon or assignable parameters.
Or you can also turning the knob to select the one you want to know. If
you have selected the ASSIGN knobs (Group 4), or you are trying to
assign different parameters to one knob of Group 1~3, it will recognize
that you are willing to assign these knob and automatically skip to
Group 4 setting, following parameters you can choose for a new Group
4 setting.
Parameters are only applied to the keyboard part: Volume, Pan,
Reverb level, Chorus level, Envelope, Attack, Envelope Release,
Cutoff, and Resonance.
Parameters are applied to the entire system: EQ LOW, EQ LOW MID,
EQ HIGH MID, EQ HIGH, ARP GAE, ARP VELOCITY, ARP RESO,
and TEMPO.
How about the effect of these parameters? Details see VOICE.
Group 1
Group 2
Group 3
Group 4
VOLUME
ATTACK
CUTOFF
ASSIGN 1
PAN
RELEASE
RESONANCE
ASSIGN 2
Reset All Knobs
Holding down the panel [SELECT] button, you will see a prompt
message box, turning a knob (clockwise or anticlockwise) to
reset related parameters.
Press the arrow button to reset all knob parameters.
63
Parameter
Loop ON
Voice Link
Value
ON/OFF
ON/OFF
Description
Switch the Single and Folder/Group
function on or off.
Set this function ON, the voice R1 will be
automatically linked with preset songs,
and changed with the melody of selected
songs.
Note:
Press the [EXIT] button back to Global Setting display.
To Next Page
Loading...
Need help?
General
