Performance Memory
Saving, Deleting or Renaming the User Performance
1. Press“USER” or “USB” tab on Performance Selection display to call
up the relevant display for user Performances.
2. Select your desired user performance by pressing the relevant
name of user performance.
3. Press the “Menu” button to display the relevant buttons on the
current display.
4. Press “SAVE TO USER” to call up soft keyboard display, enter the
new name and press “OK” to save as a new user performance to
the internal memory.
5. Press “SAVE TO USB” to display a pop-up box, you can save a
single performance file(*.prf) or save a packing performance
file(*.tpf) to the USB device memory. Press “OK” button to call up
soft keyboard display, enter the new name and press “OK” to save
it.
6. Press “DELETE” to display the pop-up box, press “Yes” to delete
the current user performance.
7. Press “RENAME” to call up soft keyboard display, enter the new
name and press “OK” to rename the current user performance.
Note:
If the new name you entered is same as the name of exited user
performance, a pop-up box will appear.
Please press “OK” and rename the file again.
70
To Next Page
Loading...
Need help?
General
