Setup
This section contains information about setting up your instrument and preparing to play. Please go through this section carefully
before turning the power on.
1. Move the MASTER VOLUME slider downwards to set the minimum
volume level.
2. Connect the AC/DC adaptor to the power supply jack.
3. Plug the AC/DC adaptor into an AC outlet.
4. Turn the power ON. The LCD on the panel will light up.
Note:
1. In order to save energy, we have designed the Auto Power Off
function to this instrument. With this function, the instrument will be
automatically powered off in 30 minutes if you do not take any action
on the instrument. For more details, please refer to Global Setting
chapter.
2. When the keyboard is not in use or in the time of thunderstorm,
please disconnect the power for safety purpose.
3. To prevent malfunction and/ or damage, always use the panel power
button to power off the keyboard. Never unplug the power adapter
before the keyboard is powered off, doing so may cause damage to
your product.
Power Supply
Setting a Music Stand
A music stand is supplied with the keyboard. You can easily attach it to
the instrument by inserting it into the slots at the rear of the panel.
9
1
2
3
4
1
2
1
2
To Next Page
Loading...
Need help?
General
