80
o p e r a t i n g t h e a n a l y z e r
mV’s
View the Calibrant A, Calibrant B and Calibrant C mV’s for each
electrode.
PUMP/BUBBLE DETECTOR
View the calibration status and values for the pump, and the calibra-
tion status for the bubble detectors, giving the air and fluid readings
for both.
SAMPLE COUNTER
Number of samples that have been performed on analyzer.
REAGENT MODULE
Verify the status and the concentrations of the reagents in the reagent
module.
STATUS
View the current reagent module serial number and installation date;
the EasyStat analyzer serial number on which the reagent module
was first installed; and the reagent volume (%) remaining with the
number of days remaining before calibrants expire.
CONCENTRATIONS
View the calibrant concentration for Calibrant A, Calibrant B, and
Calibrant C for each parameter.
To Next Page
Loading...