POWERHEAD
90-855347R1 JANUARY 1999 Page 4A-23
16. Remove crankshaft and place in powerhead stand as shown.
IMPORTANT: DO NOT remove crankshaft sealing rings from crankshaft, unless re-
placement of a sealing ring(s) is necessary. Usually, crankshaft sealing rings do
not require replacement, unless broken.
CAUTION
Safety glasses should be worn when removing or installing crankshaft sealing
rings.
17. Remove retaining ring as shown.
51850
a
b
a-Sealing Rings
b-Retaining Ring
18. Remove bearing race halves and roller bearings from crankshaft.
IMPORTANT: Keep same bearing races and roller bearings together.
51850
a
a
b
a-Bearing Race Halves
b-Roller Bearings
To Next Page
Loading...
