8 - ATTACHMENTS AND OPTIONAL EXTRA
8 - 13
• FLY JIB
Light weight trestle structure, highly rigid under load. A shape bent forward
permits to reach an operating height as high as that of the machine combined
with the jib height, keeping the hook clear of the machine.
Safety hook slewing over 360°.
Assemble the attachment on the carriage as described in the paragraph
INSTALLATION OF QUICK-COUPLING ATTACHMENTS in this chapter and use
it with the auxiliary controls in the cab as described in the paragraph CONTROL
OF HYDRAULICALLY FUNCTIONING ATTACHMENTS.
• (P37.12 PLUS - P38.12 PLUS - P38.13 PLUS - P38.14 PLUS - P40.9 PLUS –
P40.17 PLUS – P38.12 – P38.13 – P38.14 – P40.17 – P38.13EE – P40.17EE)
(A1200A)
A = 3225 mm; Weight: 115 kg; Attachment capacity: 600kg
(A1210A)
A = 1908 mm; Weight: 85 kg; Attachment capacity: 1500 kg
• (P60.10 - P72.10 – P60.10EE – P72.10EE)
(A1220B)
A = 3897 mm; Weight: 165 kg; Attachment capacity: 900 kg
WARNING! For machines equipped with stabilisers, the use of this
attachment is foreseen with the machine properly stabilized.
This attachment has a rated load capacity lower than the maximum load
capacity of your machine. Therefore, before installing the attachment, please
check that your machine is equipped with a load limiter.
All load charts refer to the machine standing still on flat, firm ground, with its
wheels aligned with its chassis.
To transport the attachment on the machine, follow these instructions:
- place the attachment on specific support "A"
- secure the rear part of the attachment by fitting pin P" and cotter pin "C" in the
specific holes on both sides.
- secure the front part of the attachment using specific fastener "B" and locking it
with pin "P1" and cotter pin "C1"
In this condition, it is not possible to open the engine bonnet; if the bonnet has to
be opened, perform the following operations:
- release the front part of the attachment by removing fastener "B", pin "P1" and
cotter pin "C1".
- rotate the attachment outwards until it is possible to open the engine bonnet
completely.
WARNING! FLY-JIB WITH WINCH When you place the attachment on
the ground, check that the rope is not crushed.
To Next Page
Loading...