1. General Description 10
1.1 Introduction 10
1.2 Pump Layout 12
2. Preparation of infusion 14
2.1 Opening the transparent covers 14
2.2 Locking the transparent covers 15
2.3 Power Supply 16
2.3.1 For pumps with 9V alkaline battery 16
2.3.2 For pumps with rechargeable battery 17
2.4 Pre-Use checklist 18
2.5 Preparation of administration sets before the infusion 20
2.6 Fitting the Administration set into the pump 25
3. Pump Functions and Terms 29
3.1 Delivery modes 29
3.2 Definitions of terms used 32
4. Actions and codes 35
5. Programming procedure 36
5.1 Turn the pump ON/OFF 36
5.2 Programming the pump 36
5.2.1
Selecting the delivery mode
37
5.2.2
Programming with the last used delivery mode
37
5.2.3
Select programming units
38
5.2.4
Programming procedure for Continuous+Bolus mode
38
5.2.5 Programming procedure Continuous mode 40
5.2.6
Programming procedure Bolus only mode
42
5.2.7
Programming procedure Automatic Bolus mode
44
5.2.8
Pre-programming the pump
46
5.3 Programming through protocol library 48
Contents IFU
6 7
To Next Page
Loading...