Need help?Do you have a question about the Micrel Rhythmic evolution and is the answer not in the manual?
Overview of the Rythmic™ pump's features, design, and intended use.
Diagram illustrating the physical components and parts of the Rythmic™ Evolution pump.
Explanation of the pump's buttons, keys, and screen elements for operation.
Procedure for opening and securing the pump's transparent covers.
Instructions for using batteries (9V alkaline, rechargeable) and power adaptors.
Steps to verify pump and accessories integrity before starting an infusion.
Guidelines for preparing administration sets, including components and warnings.
Step-by-step guide to correctly load the administration set into the pump mechanism.
Description of Continuous, Continuous+Bolus, Bolus Only, and Auto Bolus modes.
Glossary of pump terminology such as Basal Rate, Lockout Interval, and Dose Limit.
Basic power management for the pump, including starting and stopping operation.
How to choose and set the desired infusion delivery mode for the pump.
Setting infusion units (ml, mg, µg) and entering drug concentration if required.
Step-by-step guide for programming the Continuous+Bolus infusion protocol.
Step-by-step guide for programming the Continuous infusion protocol.
Step-by-step guide for programming the Bolus Only infusion protocol.
Step-by-step guide for programming the Automatic Bolus infusion protocol.
Setting up the pump with a protocol in advance for later use.
Using pre-configured protocols from the PC application for pump setup.
Crucial step to prepare the fluid path, remove air, and ensure correct infusion.
Guidelines for correctly positioning the pump for safe and effective operation.
Procedure for replacing the fluid bag during an ongoing infusion.
Restoring pump operation after power loss or battery replacement.
Managing patient-requested boluses, including override and administration methods.
Monitoring remaining volume, infusion parameters, and historical data.
Categories of information tracked by the pump: protocol, progress, graphs, events.
Monitoring real-time infusion data, bolus demands, and visual graphs.
Transferring pump data to a PC for archiving and statistical analysis.
Audible and visual alerts for events like low battery or near end of infusion.
Critical alarms that stop infusion, such as Occlusion or Depleted Battery.
System-level error messages indicating malfunctions or internal errors.
Explanation of configurable parameters like KVO, Bolus Rate, and Priming protection.
Steps to enter the configuration menu and change pump settings.
Table detailing available settings for language, time, warnings, and limits.
List of approved administration sets and their compatibility with pump models.
Information on the IP Connect Pack accessory for data transfer and monitoring.
Guidelines for regular upkeep, servicing, and professional maintenance.
Steps for cleaning and disinfecting the pump and its accessories.
Instructions for storing the pump long-term and its environmentally safe disposal.
Technical details, classifications, and compliance with medical device directives.
Detailed functional ranges, accuracies, and limits for pump operations.
Built-in safety mechanisms and operating/storage environment limits.
Important usage guidelines, including electromagnetic compatibility (EMC) information.
Details of the product warranty, coverage, and limitations.
Contact details for obtaining technical support and service for the pump.
General| Brand | Micrel |
|---|---|
| Model | Rhythmic evolution |
| Category | Medical Equipment |
| Language | English |
To Next Page