Version 1.9 Page 112 of 170
Figure 99 - Tip to Tip or Heel to Heel Step Length
Minimum gap between feet [cm or ft]: is the minimum gap between tiptoe and the heel of
the next feet.
3rd/6th/9th step speed reference: insert the reference speed for the 3rd/6th/9th step in
m/s; this option can be disabled by inserting the value 0.
Split 1/2 at distance [cm or ft]: insert at how many cm from the start the first or second split
time will be taken; leave 0 to disable split times.
Minimum foot length [cm or in]: is the minimum foot length in centimetres (or inches), used
to filter possible incorrect acquisitions.
4.4.1.6 SCREEN
The OptoGait software works on most desktop PCs and notebooks of the most recent generation,
usually with a resolution of 1024x768 (the minimum recommended resolution). For users who
desire to use computers with lower resolutions (e.g., netbooks which often have 1024x600) or
computers with lower performance, we recommend that you select the ‘Reduced’ Screen option;
this will apply the following changes:
In the tables with numerical data and the data lists, a smaller font is used in order to fit as
much information as possible in the allotted space.
In the Test|Execute module, the webcam, though connected, is not displayed in real-time
during acquisition. In any case, the video is saved and can be played in the module ‘Results’.
In the module Results|View or Compare Test it is not possible to view charts and the table
with numerical data simultaneously (either one or the other); furthermore, the bar display
is disabled. In the configuration panel, the VCR Player control for the video is hidden.
4.4.1.7 NEWS & EVENTS
As described in chap. 2.2, when the software is launched, a series of news and events are displayed
on the homepage, which are updated in real-time via the website www.optogait.com. If the
computer is not connected to the Internet, the detection of missing connectivity may take a few
To Next Page
Loading...
