EasyManua.ls Logo

Microgate Optogate - MIP (March in Place) Protocol

Default Icon
170 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Version 1.9 Page 162 of 170
6.5 MIP (MARCH IN PLACE) PROTOCOL
The MIP protocol consists of two tests in which the patient must march on the spot for 30 seconds,
the first time with his/her eyes open and the second with his/her eyes closed.
The test is defined with a starting point INSIDE the area and the right foot as the starting foot (the
patient should therefore begin the test BY LIFTIING the right foot first).
Using a two-dimensional system, the report will provide information relating to both forward-
backward and middle-side movement for the two tests (obviously with a linear system we would
only have one of these measurements).
Under the figures, we can see the data relating to the last point (end of test), or rather the forward-
backward movement, middle-side movement, distance and Alpha angle measured as described
later on.

Table of Contents

Other manuals for Microgate Optogate