Version 1.9 Page 9 of 170
1.1 SINGLE METER
In this configuration Optogait allows already to carry out various test types:
1.1.1 JUMP TEST
A series of exercises (squat jump, counter movement jump, drop jump, continuous jumps, jumps on
one leg, etc.) and protocols ('Drift' for dynamic stability, '5 Dot Drill' for reactivity and endurance,
'Single Leg Three Hops' to verify the bending capacity and stability of the knee) are pre-configured.
At the same time, the user can easily create customized tests or protocols.
1.1.2 TAPPING/FREQUENCY TEST
This type of test is ideal for exercises where separate results are required for the left and right foot
(e.g. tapping/frequency test, side movement, walking on the spot, etc.)
1.1.3 REACTION TEST
This test detects the time between one optical/acoustic impulse and the patient's movement. It can
be used to measure simple reactions or more complex movements.
To Next Page
Loading...
