Version 1.9 Page 128 of 170
Open an athlete's card, press <Next>>> in the lower right corner to go to the second page of the
card and edit the 4 required values. Press <Save> to confirm the changes.
The correct configuration and assigning of a heart-rate monitor is shown in the Test > Execute
section.
Selecting any test and pressing Execute, in the lower section a pulsing heart icon and the current
heart rate are displayed. Furthermore, the label HRM is added to the legend of values displayed in
the graphs. Similar to others, it can be turned off and on again by clicking on it and changed from
bar to line view (only in single display mode, if other measures are displayed, the graph always
shows lines).
Of course the coloured band viewing mode is the configuration function of the above-mentioned
"SportZone" configuration. Changing the mode, the band values, colours and any customized labels
change.
The athlete's max/min frequency values refer to the moment of the text execution. If the values on
the athlete's card are changed, only future tests will be affected and not those already executed.
To Next Page
Loading...
