EasyManua.ls Logo

Microgate Optogate - Page 141

Default Icon
170 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Version 1.9 Page 141 of 170
Run Data Columns
TExt. [s]: External time: available only for external impulse. This is the time between the
event (start/stop) of the impulse and the entry/exit into/from the OptoGait bars; it can also
comprise split times
Time [s]: progressive time (split) from the test beginning
Distance [cm]: progressive distance walked/run by a patient
TCont. [s]: Contact times
TFlight [s]: Flight times
Height [cm or in]: Variation of the centre of gravity height during the execution of
jumps/runs
Speed [m/s or ft/s]: Average speed of a single step (see Fig. Figure 111)
Accelerations [m/s
2
or ft/s
2
]: Speed variations of the two preceding steps
Steps [cm or ft]: Step length (see definition above)
Stride [cm]: Stride length (see definition above)
Pace [step/s]: Rhythm expressed in steps per second
Stride Angle [deg]: Alpha angle of the stride parable
Imb. [%]: imbalance indices of the run between right and left step
Double Sup [s.]: Double Support: Period of time when both feet touch the ground
Step Times [s]: time between the first contact of one foot and the first contact of the
opposite foot
Contact Phase [s | %]: the time between the first contact of the heel and the complete
support of the foot; the percentage indicates the value with respect to the total contact time
Foot Flat [s | %]: the time the foot completely touches the ground; the percentage indicates
the value with respect to the total contact time
Propulsive phase [s | %]: the time between the lifting of the heel to the complete set off of
the tip of the foot; the percentage indicates the value with respect to the total contact time

Table of Contents

Other manuals for Microgate Optogate