Version 1.9 Page 144 of 170
Invalid contact time (delete contact time):
Cont. time Flight time is Cont. time Flight time
0.35 0.43 0.35 0.43
0.30 0.15 0.30 0.45 (0.15+0.05+0.25)
0.05 (inval.) 0.25
0.32 0.41 0.32 0.41
Invalid flight time (delete flight time):
Cont. time Flight time is Cont. time Flight time
0.35 0.43 0.35 0.43
0.10 0.05 (inval.)
0.15 0.42 0.30(0.10+0.05+0.15) 0.42
0.32 0.41 0.32 0.41
The command ‘Show marked rows’, accessible from the Row Management Menu (see chap.) allows
you to remove the deleted rows from the view (and only from the view) in order to analyse only the
data of interest.
Note: if the OptoGait device is not installed correctly and consequently generates spurious times
during a test, it is better for the user to correct the installation of the device to eliminate spurious
times beforehand rather than to filter invalid times afterwards. Correct installation can be checked
using the OptoGait bars Test (see chap. 4.4.2 OptoGait HW Test).
To Next Page
Loading...
