Version 1.9 Page 79 of 170
Test Analysis
To view a single test, select the corresponding line in the ‘TEST ANALYSIS’ table and press the button
<View> (or double-click with the mouse). See chap. 4.3.1 View.
To compare two tests, enter the relevant tests in the ‘TEST ANALYSIS’ table and press <Compare>.
See chap. 4.3.2 Compare. The button is disabled if the number of tests in the window is not two.
To remove a test from the analysis, press the symbol on the corresponding line in the 'TEST
ANALYSIS' table. To delete all the tests displayed, press on the table heading.
To analyse the history, insert two or more tests in the ‘TEST ANALYSIS’ table and press the button
<History>. See chap. 4.3.3 History.
To export the data to Excel, add at least one test to the ‘TEST ANALYSIS’ table and press <Export>.
A dialog box asks if the extended version (for each data line the test heading and patient’s data are
repeated) or the simple version (only numerical test data) should be displayed.
Pressing <Print>, n-number of reports (to be printed directly or saved in PDF format) are generated;
the number corresponds to the number of tests shown in the ‘Test analysis’ window. Before
generating the output, the output directory for the above files must be selected.
Figure 62 – Test list to analyse
To Next Page
Loading...
