Version 1.9 Page 92 of 170
If the START is assigned during a double support, as occurs quite often in Gait Tests, the starting foot
is the one in front on the Treadmill.
Figure 75 - Defining the starting foot = right foot, pressing START at this moment
Assigning the starting foot before the test is of utmost importance when using OptoGait together
with a surface electromyography, in which case, the EMG software needs to know the starting foot
beforehand.
CAUTION
See chap. 1.5 for correct positioning of the bars on the treadmill.
To Next Page
Loading...
