P733 (G) SCROLL ACCESS
Use this feature to select the programming mode parameter scroll access option desired.
Select: "off" to scroll access all operator accessible parameters.
"smart" to scroll access Quick Start, previously altered, and tagged parameters.
"tagged" to scroll access operator tagged parameters only.
(Any accessed parameter may be
tagged
or
untagged
by pressing , .
is displayed when a previously tagged or altered parameter is accessed.
values: 0 = off
1 = smart (preset)
2 = tagged
P740 PERIPHERAL COMMUNICATIONS
Use this feature to select the DPL+ to BIC-II, ASCII message format.
Select: "off" if a BIC-II is not used, to increase the DPL+ processing speed.
"normal" to have messages transmitted in a continuous string of characters.
(Requires less DPL+ processing time than formatted messages).
"formatted" to have commas inserted between the message fields for easier
message dissemination (when viewed on a monitor).
Refer to BIC-II Support if a BIC-II is used.
values: 0 = off
1 = normal BIC-II messages (preset)
2 = formatted BIC-II messages
7
%
TECHNICAL REFERENCE
ENHANCEMENT PARAMETERS
PL-508 61
To Next Page
Loading...
