Milltronics AIRANGER DPL PLUS - Mt-01 Hold Message; Mt-03 Point Not Scanned

MT-01 HOLD MESSAGE
e.g.
Field Name Definition
Start Of Message STX ($02)
Message Type 2 characters, 01 (indicates the DPL+ was removed from the RUN mode)
End Of Message CR ($0D)
MT-03 POINT NOT SCANNED
e.g.
Field Name Definition
Start Of Message STX ($02)
Message Type 2 characters, 03 (indicates the Point Number is not in service)
Point # 3 characters, 001 to 003 (e.g. Point Number 1)
End Of Message CR ($0D)
Start of Message
Message Type
End of Message
Start of Message
Message Type
Point #
End of Message
PL-508 94