Mindray A9 Operating Instructions

Monitor Module Product Specifications
10 - 16 Operator’s Manual of Anesthesia System
Resolution: CO
2
: 0.1 %
O
2
: 1 %
N
2
O : 1 %
DES : 0.1 %
SEV : 0.1 %
ENF : 0.1 %
ISO : 0.1 %
HAL : 0.1 %
ISO accuracy mode Add ± 0.3 %
ABS
to full accuracy for CO
2
;
Add ± 8 %
REL
to full accuracy for all agents;
N
2
O accuracy is ± (8 %
REL
+ 2 %
ABS
).
Full accuracy mode Gas Range (%) Accuracy (vol.%)
CO
2
0 to 1 ± 0.1
1 to 5 (not including 1) ± 0.2
5 to 7 (not including 5) ± 0.3
7 to 10 (not including 7) ± 0.5
> 10 Unspecified
N
2
O0 to 20 ± 2
20 to 100 (not including
20)
± 3
O
2
0 to 25 ± 1
25 to 80 (not including
25)
± 2
80 to 100 (not including
80)
± 3
DES 0 to 1 ± 0.15
1 to 5 (not including 1) ± 0.2
5 to 10 (not including 5) ± 0.4
10 to 15 (not including
10)
± 0.6
15 to 18 (not including
15)
± 1
> 18 Unspecified
SEV 0 to 1 ± 0.15
1 to 5 (not including 1) ± 0.2
5 to 8 (not including 5) ± 0.4
> 8 Unspecified
ENF, ISO, HAL 0 to 1 ± 0.15
1 to 5 (not including 1) ± 0.2
> 5 Unspecified
TABLE 10-23 AG Module

Mindray A9 Specifications

General

Type	Anesthesia Workstation
Integrated Gas Analysis	Yes
Backup Battery	Yes
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 55°C
Battery Type	Lithium-ion
Ventilation Modes	Volume Control, Pressure Control, SIMV, Manual Ventilation
Display	Touchscreen
Patient Monitoring	ECG, SpO2, NIBP, EtCO2, Temperature
Connectivity	Ethernet, USB
Portability	Mobile (with wheels)
Battery Life	Minimum 90 minutes (typical)
Altitude	Up to 3000 meters
Power Supply	100-240 VAC, 50/60 Hz
Charging Time	Approximately 4 hours
Storage	Internal storage for patient data and system logs
Supported Languages	Multiple languages
Certifications	CE, FDA