Checking Performance and Functions 5-5
5.4 Functions Checking
Note: The chapter lists the system checking items with complete configurations and
describes them in details. If the items are not configured, the relevant tests can
be ignored.
5.4.1 Checking Flow
Check image mode
Check basic
measurement
Check cine mode
Check probe usage
Image and imaging
management
Record and save the
check
5.4.2 Checking Content
5.4.2.1 Imaging Mode
B-mode
In B mode scan, the image parameter area in the upper left corner of the screen displays the
real-time parameter values as follows:
Items F D G FR DR iClear iBeam iTouch
Meaning Frequency Depth Gain Frame
Rate
B
Dynamic
Range
Display when the function is
activated.
Parameters that can be adjusted to optimize the B Mode image are indicated in the following.
Control panel and
image soft menu
adjustment
Frequency (image quality), gain, depth, TGC, acoustic power, focus, scan
range, steer, ExFov, line density, dynamic range, iClear, persistence,
rotation/invert, iBeam, auto piecing, gray map, tint map, TSI, iTouch,
HScale, dual live, LGC, Echo, Boost.
To Next Page
Loading...
Need help?
General
