Mindray M9T User Manual

System Installation 3-7
6. Take out the probe.
3.2.2 Check
1. After unpacking, check the objects in the container with the package list to see if anything is in
short supply or is wrong.
2. Inspect and make sure there is no damage to the machine, no indentation, no cracks. If there is,
please contact Mindray Customer Service Department.
3.3 Installation of Whole Device
3.3.1 Connecting Power Cable
Connect the connector of the power adapter to the adapter port in the system. Use a three-wire
cable to connect the adapter with the external power supply.
3.3.2 Connecting ECG
Connect the ECG cable to the corresponding lead interface on ECG of the ultrasound device.
3.3.3 Connecting a Ultrasound Probe
WARNING:
The probes, cables and connectors are in proper operating order
and free from surface defects, cracks and peeling. Using a
defective probe may cause electric shock.
Probe

Mindray M9T Specifications

General

Brand	Mindray
Model	M9T
Category	Medical Equipment
Language	English