Minebea Intec CAS-SPC Series - Error Message Codes; Error Message Codes and Status

Error Message
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
S t a t * * * * * S r r * * # # * * * * CR LF
S t a t * * * * * S r r * # # # * * * * CR LF
*: Space
#:
Number (2 or 3 digit error number)
104 Operating Instructions Combics Complete Scales
Data Interfaces
G# Gross value
N Net value
T Application tare memory 1
T2 Application tare memory 2
Diff Dierence from calibration
value
Targ. Exact adjustment weight value
Nom. Exact calibration weight for
SBI protocol output
nRef Reference sample quantity
pRef Percentage of reference
wRef Reference piece weight
Qnt Result from Counting
application Result from
Counting (piece count)
and Neutral Measurement
applications
mDef Target value for animal
weighing
x-Net Animal weighing results
Setp Target value for
checkweighing
Diff.W Absolute dierence (e. g., in
kg) in Checkweighing
Lim Deviation in % in
Checkweighing
Max Upper tolerance for checkw.
Min Min. tolerance for checkw.
Stat Status
Classx Classication, class x
Limx Class limit
D Percentage (as loss)
Prc Percentage (as residue)
Wxx% Reference percentage weight
Cmpxxx Component xxx
Cont.T Contents of the tare memory
in Net-total Formulation
S-Comp Total of initial weighings for
Net-total Formulation
PT2 Preset tare
n Transaction counter
*G Sum of gross weights in
Totalizing
*N Sum of net weights in
Totalizing
Ser.no Serial number of the platform
or indicato