Minebea Intec CAS-SPC Series - Device Configuration and Language; General Configuration Options; Setting the Display Language

Conguration
You can congure the indicator by selecting parameters in the Setup menu.
These are divided into the following groups (menu level 1), menu structure see
section the “Setup Overview (Parameters)“ section
– Application parameters
– Fn key function
– Device parameters
– Info (device-specic information)
– Language
When used in legal metrology, not all parameters can be accessed. The indicator
only displays parameters that can be selected.
Factory-set parameters are identied by an “o” in the list starting on the next page.
Setting the Language
You can choose from the following languages for displaying information:
– Deutsch
– English (factory setting)
– U.S. mode
– Français
– Italiano
– Español
Example: Selecting “U.S. Mode“ for the language
t Press e to turn on the device.
t Press M.
y The menu appears on the display.
t Press the “q“ soft key several times to select the “Language“ line.
t Press the “O“ soft key.
y The language selection appears on the display.
t Press the “Q“ soft key to select the “U.S. mode“ line.
Operating Instructions Combics Complete Scales 59
Operating Design