t Press the l soft key to save the setting.
y The setting selection “o“ moves to “U.S. mode.“
t Press M or oo to exit the Setup menu.
Setting up Password Protection
t Press e to turn on the device.
t Press M.
y The menu appears on the display.
t Press the “q“ soft key several times to select the “Device
parameters
“ line.
t Press the “O“ soft key.
t Press the “q“ soft key several times to select the “Password“ line.
y The input line appears on the display.
t Enter numbers and/or letters via the keypad, see “Numeric Input via the
Keypad“ and “Letter Input via the Keypad.“
t Press the “l“ soft key to save the setting.
t Press M or “oo“ to exit the Setup menu.
60 Operating Instructions Combics Complete Scales
Operating Design
To Next Page
Loading...
