Minebea Intec CAS-SPC Series - Technical Specifications; General Specifications; Model-Specific Technical Data

Specifications
General Specications
Additional data interface Optional
Display 20 mm weight value, 7-digit plus status symbols, backlit
Housing: Material AISI 304 stainless steel (1.4301)
Dust and water protection acc. to EN60529 CAW3P IP44 (optional IP65), CASTLE-SPC: IP43 (some models IP65)
CAW3S: IP67/69K, CAS3E...: IP65 protection, CAS3G: IP67 protection
Temperature range –10°C to +40°C
Power supply 100–240 VAC (–15/+10 %), 50–60 Hz, max. 17 W/23 VA
DC power supply optional 15.5–24 VDC (±10%), max. 12 W
AC power supply optional 13–17 VAC (±10%), 50–60 Hz, max. 12 W
Limitation of emissions According to EN61326-1 Class B (IEC 61326-1)
Dened immunity to interference According. to EN61326-1, industrial areas (IEC61326-1)
Electrical safety Acc. to EN61010-1 (IEC 1010-1)
CAW* P | S
Accuracy class l, m
Verication scale intervals Option A8 <3000e “Single-range mode“ or <3125e “Multi-interval mode“ or
2x<3000e “Multiple-range mode“ according to EN 45501
Verication scale intervals Option A20 <10,000e “Single-range mode“ or <3000e “Multi-interval mode“ or
2x<3000e “Multiple-range mode“ according to EN 45501
Digital protective interface According to EN45501
Data interface Bidirectional RS-232C with control outputs (5 V, TTL standard), built-in as standard
Model-specic Data
Model type: CAW*P...-L CAW*P...-I CAW*P...-S CAW*P...-BCE CAW*P....-NCE (2 x 3000e)
Readability Weighing range 1 Weighing range 2
Weighing 15000d 30000d ≥ 60000d 1x3000e Maximum Readability Maximum Readability
capacity
capacity capacity
3 kg 0.2 g 0.1 g 0.05 g 1 g 1.5 kg 0.5 g 3 kg 1 g
6 kg 0.5 g 0.2 g 0.1 g 2 g 3 kg 1 g 6 kg 2 g
15 kg 1 g 0.5 g 0.2 g 5 g 6 kg 2 g 15 kg 5 g
30 kg 2 g 1 g 0.5 g 10 g 15 kg 5 g 30 kg 10 g
60 kg 5 g 2 g 1 g 20 g 30 kg 10 g 60 kg 20 g
150 kg 10 g 5 g 2 g 50 g 60 kg 20 g 150 kg 50 g
300 kg 20 g 10 g 5 g 100 g 150 kg 50 g 300 kg 100 g
600 kg 50 g 20 g - 200 g 300 kg 100 g 600 kg 200 g
1500 kg 100 g 50 g - 500 g 600 kg 200 g 1500 kg 500 g
3000 kg 200 g 100 g - 1000 g 1500 kg 500 g 3000 kg 1000 g
Minimum load
Accuracy class
scale intervals (e) Minimum load (Min) Minimum load intervals n=Max/e
II 0,001g<=e<=0,05g
0,1g<=e
20e
50e
100e
5000e
III 0,1g<=e<=2g
5g<=e
20e
20e
100e
500e
120 Operating Instructions Combics Complete Scales
Specifications
d
d
d
d