2
⑥ key
It is switched to the accumulation display, and also to the previous state by which the status of each
mode is set.
⑦ key
It is used for the load value to accumulate, and also it carries up the set digit when the value is set.
⑧ key
It is used when the setting of the fixed tare weight cancellation is executed.
And also it carries down the set digit when the value is set.
⑨ key
The tare weight cancellation is executed.
And one value of the selected digit is raised when the value is set.
⑩ key
It switches the gross value and net value of the displayed data.
And one value of the selected digit is lowered when the value is set.
⑪ key
It memorizes a present load value as a zero point, and makes the display a zero.
⑫ key
It outputs the printed data. Moreover, it decides various data entries, and memorizes the set value in
an internal memory.
To Next Page
Loading...
Need help?
General
