Minebea CSD-904-EX - Record Place of Set Data; Data Recorded in RAM; Data Recorded in EEPROM

48
9. Record place of set data
This unit records each data in RAM and EEPROM as follows;
It is preserved almost permanent because EEPROM is nonvolatile.
Moreover, RAM data disappears in power supply OFF because RAM is not backed up.
9-1. Data recorded in RAM
● Tare weight cancellation data
● Zero tracking data
● Zero set data
● Fixed tare weight cancellation data
9-2. Data recorded in EEPROM
● Calibration data
● Function data
● C function data
● Comparator set value
● Accumulated value, Accumulated count data
● All the data recorded in RAM is initialized when the power is turned on.
● When the instrument changes from the stand-by condition to measurement mode, the data recorded in RAM is not initialized, and it operates
by the data stored just before the stand-by condition.