37
7. Function mode
Various functions become effective by setting the function data.
7-1. Setting method of the function mode
Move from the normal measurement mode to stand-by
condition by pressing the key.
is displays by pressing the key with
the key, and enters into the function mode.
By pressing the key, is displayed.
Please select function number which you want to change.
: Change the value of changing digit.
: Select the changed digit.
: Change the display value into “0”.
: Return to the display.
: Memorize the display value and proceed to
the next step.
: The function mode is finished without
changing all setting.
Please press the key, and set the setting value
of the selected function number.
Please press the key. The setting contents is
registered, and the display panel displays the following
registered function number.
Please continue and select the selected function number
when you change setting of other function numbers.
If the key is pressed after registration is completed,
it becomes display. Please set to the
stand-by condition by pressing the key.
Measurement mode
Stand-by condition
＋
Completing
registration.
To Next Page
Loading...
Need help?
General
