II
For safe operation
Be sure to read this instruction manual before use.
1. Installation place
Caution
● Environmental temperature ：－10 ℃ to 40 ℃
● Environmental humidity ：Less than 85 %RH (Non condensing)
Warning
① Location where installation is not allowed.
● Do not locate the instrument in direct and/or high temperature area.
● Do not use the instrument in a high humid area.
● Do not install the instrument where there are vibrations and shocks.
● Do not use the instrument where there is excess of dusts and fine particles.
● Do not use the instrument where there are corrosive gas and salt and like that.
● Do not install the instrument where there is rapid change of temperature and humidity.
● Do not install the instrument near the devices that are magnetized or generate an electromagnetic field.
● Do not install the instrument where the instrument may be affected by radioactivity or radial rays.
● Avoid the location where chemical reaction may take place such as in a laboratory, or like that.
Use the instrument where the temperature/humidity specifies with the range as follows：
As it may cause an unexpected faulty in the instrument., don’t locate the instrument on the places as follows :
To Next Page
Loading...
Need help?
General
