38
7-2. Function of the function data
Items Function No.
Setting value
Contents
0 OFF
1 Moving average times : 2 times
2 Moving average times : 4 times
●3 Moving average times : 8 times
4 Moving average times : 10 times
5 Moving average times : 12 times
6 Moving average times : 14 times
Setting of digital filter F-01
7 Moving average times : 16 times
0 5 times/s
Display times F-04
●1 15 times/s
0 OFF
1 Moving average times : 2 times
2 Moving average times : 4 times
3 Moving average times : 8 times
●4 Moving average times : 10 times
5 Moving average times : 12 times
6 Moving average times : 14 times
Setting of stabilization
filter
F-05
7 Moving average times : 16 times
Data width of stabilization
filter
F-06
000～999
●005
Unit : 1D
00 : Stabilization filter OFF
Time width of stabilization
filter
F-07
00～99
●01
Unit : 0.5 s
00 : Stabilization filter OFF
●0 Invalid
Key lock F-08
1 Effective
Stability detection data
width
F-10
0～9
●4
Unit : 0.5D
0 : Stability detection OFF
Stability detection time
width
F-11
0～9
●2
Unit : 0.5 s
0 : Stability detection OFF
●0 Effective
Operating condition of fixed
tare weight cancellation
F-15
1 Invalidity
●0
OFF(Operating by the key or external
control input)
1 Data exceeding +5D, only during stable
Automatic print operation F-16
2
Data beyond the limits from –5D to 5D,
only during stable
0 OFF
1 All data
2 All data, only during stable
3 Data which exceed +5D
●4 Data which exceed +5D, only during stable
5 Data beyond the limits from –5D to 5D,
6
Data beyond the limits from –5D to 5D,
only during stable
7 Weigh in mode
Comparator comparison
operation
F-20
8 Weigh out mode
●0 Gross value Target of comparator
comparison operation
F-21
1 Net value
●0 On delay Comparator hysteresis
operating conditions
F-24
1 Off delay
● has been set as default.
To Next Page
Loading...
Need help?
General
