6. Getting started
MiR1000 User Guide (en) 12/2020 - v.1.4 ©Copyright 2019-2020: Mobile Industrial Robots A/S. 45
7. Place the lid of the box so that you can use it as a ramp. Align the lid so that it is flush
with the base of the box.
8. Remove the wheel stop board from the pallet to let the robot drive on the ramp.
6.3 Connecting the battery
To connect the battery to the robot, you need to open the rear compartment—see Accessing
the internal parts on page 27.
To Next Page
Loading...
