Mircom FA-301-12DDR User Manual

54
Configuration
Figure 33 Command Menu
11.2.1 Using the Keypad to Program the FA-300
1. Access the configuration mode as described in "11.1 Accessing Configuration Mode"
above.
2. Press ENTER to select an option.
The corresponding menu appears.
3. Press the up and down arrow buttons to scroll through the menu.
4. Press ENTER to select an option.
5. Press the left or right arrow buttons to select or unselect an option (selected = X). Use
the up and down arrows to scroll through the different options.
6. Once you have made the correct selection, press ENTER to confirm the change.
7. Press CANCEL to return to the previous menu.
-Command Menu-
1. FA-300 Config
2. Config Info
3. Set Time
4. Set Password
5. View EventLog
6. Clear EventLog
7. Walk Test
8. I3 Loop test
9. Dialer Config
10.Test Dialer
11.Bypass Det Ckt
12.Bypass NAC Ckt
13.Aux Disc
14.Exit

Mircom FA-301-12DDR Specifications

General

Brand	Mircom
Model	FA-301-12DDR
Category	Control Panel
Language	English