Mircom FA-301-12DDR

69
Configuration
Command Menu-->Dialer Config
11.12.2Telephone Line
Figure 46 Telephone Line menu
Command Menu - Dialer Config - Account
Info
4. Account #2 Identification
654321->Default
Same as Account #1.
Command Menu - Dialer Config - Account
Info
5.Account #2 Telephone Number
[ 101 ]->Default
Same as Account #1.
Command Menu - Dialer Config - Account
Info
6.Account #2 Reporting Format
[X] Contact ID-Def
[ ] SIA 300 Baud
[ ] SIA 110 Baud
Same as Account #1.
Command Menu - Dialer-Config - Telephone
Line
1. Line #1 Dialing Type
[X] DTMF Dial->Def
[ ] Pulse Dial
Set the dialing type for line #1.
This is the type recognized or
preferred by the telephone
company.
Command Menu - Dialer-Config - Telephone
Line
2. Line #2 Dialing Type
[X] DTMF Dial->Def
[ ] Pulse Dial
Same as Line #1.
Account#2 ID:
_
Account#2 Telnum:
_
ACCNT#2 Format:
[X] Contact ID
1 Line1 Dialtype
2 Line2 Dialtype
3 Line1 Dialtone
4 Line2 Dialtone
- Telephone Line -
5 Num of Retries
Line#1 Dialing Type:
[X] DTMF Dial
Line#2 Dialing Type:
[X] DTMF Dial