Mircom FA-301-12DDR User Manual

68
Configuration
Command Menu-->Dialer Config
11.12.1Account Info
Figure 45 Account Info menu
Command Menu - Dialer Config - Account
Info
Account #1 Identification
123456->Default
Use this menu to set the Account
ID for the monitoring station to
which the dialer reports events.
The maximum number of digits
allowed is six. For contact ID,
only the first four digits are used.
Unless you are using the SIA
protocol, the allowed digits for
the account ID are simple digits 0
to 9 and hexadecimal digits A to
F (the SIA protocol only allows
digits 0 to 9).
To enter hexadecimal digits,
press the INFO button. The letter
“A” will appear. To scroll through
the rest of the letters, press INFO
repeatedly. Press # to move the
cursor to the right or press * to
move it to the left.
Command Menu - Dialer Config - Account
Info
2.Account #1 Telephone Number
[ 101 ]->Default
Use this function to set the
telephone number of the
monitoring station. The maximum
number of digits allowed is 19
including “,” and numerals. The
“,” will be treated as a 1 sec
delay. To enter “,” press the INFO
button. Press # to move the
cursor to the right or press * to
move it to the left. An example of
a typical telephone number is
9,,12345678.
Command Menu - Dialer Config - Account
Info
3.Account #1 Reporting Format
[X] CONTACT ID-Def
[ ] SIA 300 Baud
[ ] SIA 110 Baud
Set the reporting format that is
recognized or preferred by the
monitoring station.
1 Account#1 ID
2 Account#1 Tel
3 Accnt#1 Format
4 Account#2 ID
- Account Info -
5 Account#2 Tel
6 Accnt#2 Format
Account#1 ID:
_
Account#1 Telnum:
_
ACCNT#1 Format:
[X] Contact ID

Mircom FA-301-12DDR Specifications

General

Brand	Mircom
Model	FA-301-12DDR
Category	Control Panel
Language	English